A delta-function method for the n-th approximation of relaxation or retardation time spectrum from dynamic data

A function series g(x; n, m) is presented that converges in the limiting case n and m = constant to the delta-function located at x = = 1. For every finite n, there exists 2n+1(–nmn) approximations of the delta-function _(n)(x–x _n,m ). x _n,m is the argument where the function reaches its maximum. A formula for the calculation is given.The delta-function approximation is the starting point for the approximative determination of the logarithmic density function of the relaxation or retardation time spectrum. The n-th approximation of density functions based on components of the complex modulus (G*) or the complex compliance (J*) is given. It represents an easy differential operator of order n.This approach generalizes the results obtained by Schwarzl and Staverman, and Tschoegl. The symmetry properties of the approximations are explained by the symmetry properties of the function g(x; n, m). Therefore, the separate equations for each approximation given by Tschoegl can be subsumed in a single equation for G and G, and in another for J and J.     

Viskositätsmessung mit dem longitudinal schwingenden Band

A method for the detection of small masses with the aid of a longitudinally vibrating band is described and further applications, e.g. for viscosity and humidity measurement are discussed. The complex Young's modulus of the band can also be determined.

     

Forced oscillations of a layer of a viscoelastic material under the action of a convective pressure wave

The longitudinal and transverse components of deformation of the surface of a flat layer of a viscoelastic material glued onto a solid base under the action of a traveling pressure wave are determined. The coating compliance is described by two components corresponding to two components of surface displacement. The dimensionless compliance components depend only on the viscoelastic properties of the material, the ratio of the wave length to the layer thickness λ/H, and the ratio of the wave velocity to the velocity of propagation of shear oscillations V/C _t ⁰ . Data on the dynamic compliance are presented for 0.3 < λ/H < 30 and 0.1 < V/C _t ⁰ < 10. The compliance is demonstrated to be determined by its absolute value and by the phase lag of strain from pressure. The effect of viscous losses in the material and compressibility of the latter on the dynamic compliance is analyzed. An anomalous behavior of the compliance with the wave velocity being greater than a certain critical value is explained. __________ Translated from Prikladnaya Mekhanika i Tekhnicheskaya Fizika, Vol. 48, No. 2, pp. 90–97, March–April, 2007.     

Indentation tests investigation of mechanical behavior of two-dimensional materials

准确了解二维材料的力学性能对于推动其应用具有重要意义, 无基底压痕技术是目前最广泛采用的二维材料力学性能测试方法之一, 本文综述了二维材料压痕研究的最新进展以及所面临的问题, 并对将来的研究工作进行了展望.无基底压痕技术是将二维材料转移到带有沟槽或柱形孔的基底上, 制备二维材料"梁"和"鼓"模型, 然后利用原子力显微镜测量其在压针作用下的载荷--位移关系, 最后通过基于连续介质薄膜导出的压痕响应分析模型拟合实验结果, 估算出二维材料的弹性模量和本征强度.由于二维材料的厚度远小于连续介质薄膜, 来自于压头以及基底孔侧壁的范德华力对二维材料的压痕响应具有显著影响, 造成二维材料与传统压痕分析模型中的基本假设不符, 导致不能准确预测二维材料的弹性模量; 另外, 由于传统压痕模型无法准确描述二维材料在大变形下的非线性行为, 以及由缺陷等引起的应力集中, 导致由压痕测试表征的二维材料(特别是多晶二维材料)本征强度具有较大的偏差. 因此, 一方面需要正确了解由压痕技术获得的二维材料力学性能, 另一方面还需对目前的研究方法做进一步的改进和完善.     

A molecular mechanics approach for analyzing tensile nonlinear deformation behavior of single-walled carbon nanotubes

In this paper, by capturing the atomic information and reflecting the behaviour governed by the nonlinear potential function, an analytical molecular mechanics approach is proposed. A constitutive relation for single-walled carbon nanotubes (SWCNT’s) is established to describe the nonlinear stress-strain curve of SWCNT’s and to predict both the elastic properties and breaking strain of SWCNT’s during tensile deformation. An analysis based on the virtual internal bond (VIB) model proposed by P. Zhang et al. is also presented for comparison. The results indicate that the proposed molecular mechanics approach is indeed an acceptable analytical method for analyzing the mechanical behavior of SWCNT’s. The project supported by the National Natural Science Foundation of China (10121202, 90305015 and 10328203), the Key Grant Project of Chinese Ministry of Education (0306) and the Research Grants Council of the Hong Kong Special Administrative Region, China (HKU 7195/04E).     

松弛与蠕变力学特性转换关系的研究

本文首先论述了拉伸应力松弛模量Ｅ（ｔ）与拉伸蠕变柔量Ｄ（ｔ）之间的近似与精确转换关系式，提出一种诊断Ｄ（ｔ）的数值积分算法，通过应力松弛模量实验给出一种固体推进剂Ｅ（ｔ）和Ｄ（ｔ）的实测与转换计算结果，计算结果有较小的误差具有重要的实用价值。     

Determination of Bone Trabeculae Modulus—An Ultrasonic Scanning and MicroCT (μCT) Imaging Combination Approach

To date, there is no method to measure non-destructively the modulus of trabeculae within cancellous bone, whilst retaining its structural integrity. In this study ultrasonic scanning, coupled with microCT imaging, is employed to determine trabeculae modulus along the three major anatomical axes non-destructively. The proposed method allows cancellous bone specimens to remain intact, for possible use in subsequent studies. Volume rendering of the microCT images allows three-dimensional visualization of cancellous bone specimens to be tested. This facilitates trabeculae selection and accurate measurement of distance traveled by the ultrasonic wave, thus yielding a good degree of confidence in the acoustic velocity measured. For all the three principal anatomical directions, the measured acoustic speeds ranged from 2,115 to 3,077 m/s, giving an average of 2,505 m/s. Average wave velocities in the superior–inferior, medial–lateral and anterior–posterior anatomical directions were found to be 2,295, 2,469 and 2,754 m/s, respectively; the differences corresponding to the three directions do not appear to be significant. Subsequently, the modulus was then determined using elastic wave propagation theory.     

磁流变弹性体若干物理量的数值分析

应用有限元方法,考虑了颗粒的磁化饱和过程与非线性磁化过程,计算得到了磁流变弹性体中的磁场分布,进而研究了在不同磁场大小、不同颗粒体积比浓度下磁流变弹性体在成链方向的相对磁导率,计算结果和实验结果取得了一致。利用Maxwell应力张量,计算了磁场引起的磁流变弹性体的附加剪切模量。分析了颗粒体积比浓度、外加磁场对磁流变弹性体的磁致剪切模量的影响。研究了颗粒为旋转椭球形状时,颗粒的放置方式与其长短轴之比对磁流变弹性体的磁致剪切模量的影响。计算结果表明,磁流变弹性体的相对磁导率随颗粒体积比浓度的增大而增大,随磁场强度的增大而减小,颗粒的形状和放置方式对磁流变效应有很大的影响。     

约束Fractional Tikhonov正则化的模迭代方法

反问题是现在数学物理研究中的一个热点问题,而反问题求解面临的一个本质性困难是不适定性。求解不适定问题的普遍方法是:用与原不适定问题相“邻近”的适定问题的解去逼近原问题的解,这种方法称为正则化方法.如何建立有效的正则化方法是反问题领域中不适定问题研究的重要内容.当前,最为流行的正则化方法有基于变分原理的Tikhonov正则化及其改进方法,此类方法是求解不适定问题的较为有效的方法,在各类反问题的研究中被广泛采用,并得到深入研究.     

Polymer physics inspired approaches for the study of the mechanical properties of amyloid fibrils

Amyloid structures constitute a class of highly ordered nanomaterials formed by insoluble protein aggregates. These aggregates are characterized by a cross‐β structural motif in which β‐sheets are oriented perpendicular to the fibril axis and bound together by a dense hydrogen bonding network. Although they have been associated with several neurodegenerative disorders, such as Alzheimer's and Parkinson's diseases, amyloid fibrils have also been found in many physiologically beneficial roles, for instance in adhesives and hormone storage. Inspired by this natural occurrence of functional amyloid, the hierarchal self‐assembly of these structures has recently been used to develop artificial biomaterials for applications in medicine and nanotechnology. In order to realize the full potential of amyloids as functional materials, it is important to understand their fundamental mechanical properties. This review explores a range of experimental strategies to determine the mechanical properties of amyloid fibrils and discusses the results in the context of polymer physics concepts. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2014 , 52, 281–292